1/8” Up-Spiral Router Bit for Shaper Origin
The 1/8” up-spiral straight bit is used for cutting finer details with the Shaper Origin Handheld CNC (67155, sold separately). The 1/8” cutter diameter fits into tight spaces, and can cut grooves up to 1/2” deep. Two spiral cutting flutes help to eject material rapidly from the cut for less heat build-up. Made from solid carbide, known for maintaining a sharp cutting edge for a long time.
1/8” Collet and Nut for Shaper Origin
This 1/8” collet works with the Shaper Origin Handheld CNC Router (67155, sold separately). By allowing you to use narrow 1/8” shank router bits, it greatly increases the potential variety and intricacy of your Origin projects. In addition, this collet gives you access to a range of other specialty bits with 1/8” shanks, opening up a wide range of creative possibilities. Use it for inlays, fretwork, detailed engraving and more. Compatible with Shaper SM1 Spindle. Made in USA.
Note: Router bit not included.
1/4” Up-Spiral Router Bit for Shaper Origin
The 1/4” up-spiral straight bit is the most commonly used cutter for the Shaper Origin Handheld CNC (67155, sold separately). It is capable of cutting up to 1/4” deep per pass, up to a maximum depth of 3/4”. Two cutting flutes enable the cutter to be moved rapidly through the material. Made from solid carbide, which is known for maintaining a sharp cutting edge for a long time.
Engraving Router Bit for Shaper Origin
The 60° engraving bit is used for cutting fine lines in a variety of materials, including wood and soft metals. It has a 1/4” shank, and fits the Shaper Origin Handheld CNC (67155, sold separately) with the stock collet installed. The bit features dual flutes, and is made from solid carbide for maximum edge-holding durability.
